The Scotty Cameron Circa 62 line of putters, made by Titleist, consists of five models: No. 1, No. 2, No. 3, No. 6 and No. 7. Each club comes with 4 degrees of loft, 330-gram head weight and a 71-degree lie. The head is made of carbon steel with ...
Published: 8/8/2009 3:00:56 AM
The TaylorMade Rescue Club comes in a range from 2 wood to 6 wood, with a degree from 17 to 28. Steel and graphite shafts are available, the latter with three options: senior, regular or stiff flex, which is a TaylorMade RE*AX SuperFast 60 shaft ...
Published: 8/8/2009 3:01:01 AM
With a complete line of lofts (48 degrees to 64 degrees), Titleist Vokey Spin Milled Wedges also boast low-, mid- and full-bounce sole options. The line is made from a mild 8620 carbon steel available in Titleist Tour Chrome, Oil Can (un-chromed ...
Published: 8/8/2009 3:01:02 AM
Published: 8/8/2009 3:01:03 AM
The Rapture V2 is the latest in Ping's Rapture family of titanium drivers. It boasts titanium and tungsten 460cc head. The Rapture V2 is equipped with two visible sole weights, near the sole and toe. This, Ping claims, reduces spin, optimizes cen...
Published: 8/8/2009 3:01:05 AM
Big Ben (C-S3) drivers, made by Ben Hogan Golf, are available at select retailers and directly from Callaway, which owns the Hogan brand. The clubs, currently out of production, followed a few companies (namely Taylor Made and Callaway) in addin...
Published: 8/8/2009 3:01:06 AM
Currently out of production, the Taylor Made Dual rescue line of fairway woods is still available from select retailers and used dealers and is as popular as the company's new lines. The line contains a 3-, 4- and 5-wood, stainless steel construc...
Published: 8/8/2009 3:01:08 AM
TaylorMade Burner TP fairway woods are currently out of production, however, a variety of retailers still carry them, some well-stocked. Each club is made from stainless steel and comes fitted with a TaylorMade SuperFast RE*AX TP 75-gram graphite...
Published: 8/9/2009 3:00:59 AM
Golf clubs have evolved dramatically over the past few decades. Until the midway point of the twentieth century, golf club shafts were made of wood. Then came steel shafts with their strength and flexibility. The onset of titanium gave golfers ev...
Published: 8/10/2009 3:00:59 AM
The Nickent 3DX driver is a square, 460cc titanium driver, the predecessor to the 4DX line. The 3DX is stocked with a UST Proforce shaft and is available in a tour model. Both are equipped with four sole weights near the toe and heel. The line w...
Published: 8/10/2009 3:01:02 AM
The Callaway Big Bertha 454 is a 454cc titanium driver currently out of production but still available from various dealers. It is a predecessor to the new Big Bertha 460. The 454 was made similar to the original Big Bertha line and boasts a thi...
Published: 8/11/2009 3:01:05 AM
The Ping G10 Draw driver is a high trajectory, game-improvement 460cc driver made with four degrees of loft: 9, 10.5, 12 and 13. With its medium-spin titanium construction, the G10 Draw comes standard with a head weight of 199g and signature Ping...
Published: 8/11/2009 3:01:11 AM
The Callaway X20 iron comes in two different styles, the X20 and the X20 Tour, with the tour club marketed as more of a "player's iron." The game improvement X20 has more of an offset hosel designed to help players who slice and those who have sl...
Published: 8/11/2009 3:01:12 AM
While a female golfer must approach golf club purchases with the same level of care as men, women's clubs are constructed differently and require some different approaches for comparison shopping. Women's golf clubs are designed for average femal...
Published: 8/22/2009 3:04:24 AM
The Ping i-series Anser 4 putter falls into the famous Ping Anser category of heel-toe weighted putters. Additional weight has been inserted into the sole to promote more balance and expand the sweet spot. The Anser 4 model has a minimal hosel of...
Published: 8/11/2009 3:01:15 AM
From the 2009 line of Taylor Made drivers, the R7 CGB Max features titanium construction, a 460cc head, three different degrees of loft (9.5, 10.5 and 12) and three movable sole weights. The weighting system, which the manufacturer calls the Mova...
Published: 8/12/2009 3:00:54 AM
The Nike Ignite 460cc TI driver is the latest club to harness the power of titanium evolution in an attempt to enhance both distance and workability. Using revolutionary NexTi technology, Nike designed the Ignite to combine maximum power and dist...
Published: 8/12/2009 3:00:55 AM
Almost immediately after Callaway introduced the original Big Bertha driver in 1991, the product line became a big success. Many buyers rushed to buy the first Big Bertha clubs for their longer shafts and innovative wide club heads, according to ...
Published: 8/12/2009 3:00:59 AM
The Ping Rapture V2 is a titanium-tungsten game-improvement driver designed to help developing players keep the ball up and in the fairway. With two sole weights, the club is available in lofts of 9.5, 10.5, 12 and 13.5 degrees. Off the rack, mos...
Published: 8/12/2009 3:01:02 AM
The Ping Rapture line is marketed to developing players and those who want maximum forgiveness from each club in their bag. The Rapture V2 line is made with a combination of stainless steel, titanium and tungsten, and each club is uniquely perime...
Published: 8/12/2009 3:01:04 AM
Orlimar uses bi-metal, tri-metal and titanium technologies to create long-hitting clubs. Their drivers feature Aldila NVS graphite shafts, Golf Pride Tour Velvet grips, and loft angles between 8.5 and 12.5 degrees. The company's irons and wedges ...
Published: 8/13/2009 3:07:32 AM
The Titleist brand line of drivers as of 2009 features three technologically advanced, traditionally inspired clubs made from what Titleist calls a multi-material titanium composite. They are designed to maximize particular ball flight characteri...
Published: 8/13/2009 3:07:34 AM
The Cleveland Launcher 460 is the flagship driver in the Cleveland line. The Launcher features a full size 460cc head, with a mid-trajectory and low-spin design. The Launcher comes in 9, 10.5, or 12 degrees, with draw models available. The demo m...
Published: 8/13/2009 3:07:40 AM
Component heads are not all created equal. Just like brand name clubs, there are good and bad ones. You have to decide which features you want the head to have. Do you like square heads or traditional shape? Draw models or regular? Component hea...
Published: 8/13/2009 3:07:41 AM
Refinishing a Scotty Cameron putter requires precision and some do-it-yourself experience. Because the putters are pricey to begin with, beginning club makers should consider having their Scotty Camerons professionally refinished or doing a pract...
Published: 8/20/2009 3:09:14 PM
